Dialog
Apply
-
Executes the align function according to the parameters set in the dialog. The object in the Moveable Object drop box will be aligned in respect to the object in the Fixed Object drop box.
New Transform
Align Selected
-
This button aligns all selected objects in respect to the object in the Fixed Object drop box. The object in the Moveable Object drop box is ignored.
Reset Values
-
Resets all dialog settings to their defaults. Note that the object drop areas are not cleared.
Fixed Object
-
This drop field accepts the object to which the moveable object is aligned to - the fixed object will not change position during alignment.
Moveable Object
-
This drop field accepts the object that is to be aligned with the fixed object.
X align mode
-
There are three modes available (four if you count the "Off" setting).
- X off - no alignment for the X axis
- X max - aligns moveable object with fixed object's highest X
- X center - centers moveable object X in respect fixed objects X
- X min - aligns moveable object with fixed object's lowest X
The inside/outside setting determines wether the moveable object gets aligned along the inside or the outside of the fixed object. This setting doesn't apply to the "center" setting.
Y align mode
Z align mode
